UniPower Tech Notes - Eaton / Powerware 9125

Click image for larger view

New/Surplus Eaton/Powerware
9125 Tech Notes*

Model Selection Guide
Model	Power Out VA / Watts	Input Connection³	Output Receptacles	Dimensions (in.)	Weight (KG/LB)
120 V, 50/60Hz Models
PW9125 700	700 / 490	5-15P	(6) 5-15R	3.5 x 17.0 x 19.4 in	34
PW9125 1000	1000 / 700	5-15P	(6) 5-15R	3.5 x 17.0 x 19.4 in	34
PW9125 1250	1250 / 875	5-15P	(6) 5-15R	3.5 x 17.0 x 19.4 in	50
1. 6-foot line cord 2. L5-30R is located on a 12-inch attached cord.

Extended Battery Modules (EBMs)
Model	Dimensions	Weight
PW9125 24 EBM 24Vdc (use w/ 700/1000 VA)	3.5 x 19.0 x 19.4	65
PW9125 48 EBM 48Vdc (use with 1250 / 2000 VA)	3.5 x 19.0 x 19.4	65

Battery Run Times (In Minutes)
Load VA	Load Watts	Standard Internal Batteries	1 EBM	2 EBMs	3 EBMs	4 EBMs
700 / 1000 VA Models
200 VA	128W	37	271	546	---	---
400 VA	192W	19	142	278	---	---
700 VA	320W	9	72	156	---	---
850 VA	402W	6	59	124	---	---
1000 VA	503W	5	48	104	---	---
1250 / 2000 VA Models
400 VA	280W	46	177	331	501	682
700 VA	490W	25	96	180	272	370
850 VA	595W	21	76	142	214	292
1000 VA	700W	16	61	115	174	237
1250 VA	875W	11	46	87	131	179
1500 VA	1050W	8	37	70	106	144
1800 VA	1260W	6	30	57	85	116
2000 VA	1400W	5	26	49	74	100
2500 / 3000 VA Models
1250 VA	875 W	16	57	90	150	200
1500 VA	1050 W	13	55	72	120	160
2500 VA	1750 W	7	28	48	68	88
3000 VA	2100 W	5	25	38	54	70
Backup times are approximate and may vary considerably due to modified configurations, environmental conditions, battery age and other factors

	Unit Specifications
	Electrical Input
	Nominal Voltage	120 Vac, (user-selectable for 100,110, 120 & 127 Vac)
	Voltage Range	80-144V (without using batteries)
	Input Power Factor	>.95 Typical
	Frequency	50/60 Hz, autosensing
	Frequency Range	45-65 Hz
	Electrical Output
	Wave Form	Sine Wave
	Frequency Regulation	±3 Hz online, ±0.1 Hz on battery
	Efficiency	89-92%, depending on load
	On Utility Voltage Regulation	± 3% of nominal
	On Battery Voltage Regulation	± 3% of nominal
	Load Crest Factor	3 to 1 ratio
	Environmental and Safety
	Safety Markings	UL, CSA, NOM
	EMC Markings	FCC Class B and VCCI Class II
	Surge Suppression	IEEE/ANSI C62.41 Cateogry B (formerly 587)
	Audible Noise	<45 dBA (on utility); <50 dBA (on battery
	Ambient Operating / Storage Temperature	0 to 40^oC (32 to 104^oF) / 0 to 25^oC (23 to 77^oF)
	Relative Humididty	5 to 90%, non-condensing
	Network Transient Protector	In and out jack for telephone/modem protection or 10Base-T network cable; UL497A tested
	REPO Port	Meets NEC code 645-11 intent and UL requirements
	Communications
	Serial Port	RS-232 Communications Port standard
	Communications Cable	6-ft. comm. cable included
	ConnectUPS SNMP Module (optional)²	SNMP card adds direct control and monitoring capabilities in SNMP-based networks
	ConnectUPS SNMP Module (optional)²
	RS232 Multi-Port Module (optional)²	Equipped with (6) comm. ports to provide serial communications to multiple devices
	RS232 Multi-Port Module (optional)²
	USB Module (optional)²	Allows UPS to communicat with Windows 98 computers via USB port, factory installed option only
	USB Module (optional)²
	General
	UPS Bypass	Automatic on overload or UPS failure
	Diagnostics	Full system self-test on power up
	Topology	True online, double-conversion
	Dimensions and Weight	See Model Selection Guide Above
	Battery
	Internal Battery Type	Sealed, lead-acid; maintanance free 700/1000 VA: (2) 12V, 9 Ah 1250/2000 VA: (4) 12V, 9Ah
	Internal Battery Type
	EBM Battery Type	PW9125 24 EBM: (8) 12V, 9 Ah PW9125 48 EBM: (8) 12V, 9 Ah
	Battery Replacement	Hot-swappable internal and external batteries
	Battery Runtime	See Battery Run Times Above
	Recharge Time	<2 hrs. from comlete discharge to 80% capacity at nominal line conditions
	Start-On-Battery	Allows start of UPS without utility input

Terms | Privacy Statement | Web Updates

Certified Minority and Woman owned company

		Call Toll Free 888-822-4767

You are here >>> Home · Tech Notes · Recertified Eaton / Powerware 9125