UniPower Tech Notes - Recertified Eaton / Powerware 5115

Click image for larger view

New/Surplus Eaton/Powerware
5115 500VA Tech Notes*

Model Selection Guide
Model	Power Out VA/Watts	Input Connection	Output Connection	Dimensions H x W x D (IN / MM)	Weight (KG/LB)
120 Vac¹; 50/60 Hz auto-sensing
PW5115 500	500/320	5-15P	(4) 5-15R	7.6 x 5.9 x 10.6/193 x 150 x 270	17.2/7.8
1. Also user-selectable for 110V via rear panel DIP switches

Run Times
Load ^VA	Load ^Watts	PW5115 500(i)	PW5115 750(i)	PW5115 1000(i)	PW5115 1400(i)
200 VA	128 Watts	17	38	41	58
300 VA	192 Watts	11	27	28	41
500 VA	320 Watts	5	14	15	28
600 VA	402 Watts		9	10	19
750 VA	503 Watts		6	8	14
900 VA	603 Watts			6	10
1000 VA	670 Watts			5	8
1200 VA	804 Watts				6
1400 VA	938 Watts				5
Runtimes times are approximate and may vary considerably due to modified configurations, environmental conditions, battery age and other factors

	Unit Specs
	Electrical Input
	Voltage	120 & 230 Vac nonminal
	Online voltage range	±20% of nominal voltage at full load
	Nominal Input Frequency	45-65 Hz, 50/60 Hz, auto sensing
	Input Protection	120 V models: circuit breaker; 230V models: AC source overcurrent protection device required
	Electrical Output
	Power Levels	500-1400 VA
	Online Regulation	-10%, +6% of nominal voltage
	On Battery Voltage Reg.	±0.1 Hz of nominal frequency
	Voltage wave shape	Sine wave (during normal and battery operation)
	Interconnecting cords	2 ea. IEC-320, 10A (230V models)
	Indicators and Controls
	Front Panel LEDs	Poweron, on battery, overload and battery fault
	Front Panel Buttons	On/Off and alarm silence / self-test
	Communications Port	DB9 female (UPS ships with comm. cable); USB interface optional
	Power Factor	500 VA: 0.64; 750/100 VA: 0.67; 1400 VA: 0.68
	Battery
	Bettery Type	Sealed, maintnance-free lead-acid; starved electrolyte
	Battery Description	500 VA: (1) 12V, 9 Ah 750 VA: (2) 12V, 7.2 Ah 1000 VA: (2) 12V, 9 Ah 1400 VA: (3) 12V, 9 Ah
	Battery Description
	Battery Recharge	< 3 hours to 90% capacity
	Battery Runtime	5 minutes minimum; see battery runtimes table
	Start-On-Battery	Startup with UPS batteries in absence of utility power
	General
	Topology	Line-Interactive
	Dimensions and weight	See Model Selection Guide
	Network Transient Protector	In and out RJ11 jack for telephone / modem protection (120V models only) or RJ45 for 10Base-T network cable; UL497A tested
	Environmental and Safety
	Safety Markings	UL, cUL and CSA; 230V models also CE and TUV
	Safety Conformance	UL 1778, CAN.CSA C22.2, No. 107.1; 230V Models also EN 50091-1-1 and IEC 60950
	EMC Markings	FCC Class B; 230V models also CE (EN50091-2) and C-Tick
	Surge Suppression	ANSI C62.41 Category A (formerly IEEE 587)
	Operating Temperature	0 to 40^oC (32 to 104^oF); UL tested 25^o (77^oF)
	Immunity	IEC 801-2, -3, -4
	Transit / Storage Temp.	-15 to 55^oC (5 to 131^oF)
	Audible Noise	<45 dBA, typical
	Relative Humidity	5-95% non-condensing
	* Manufacturer's specifications are subject to change without notice

Terms | Privacy Statement | Web Updates

Certified Minority and Woman owned company

		Call Toll Free 888-822-4767

You are here >>> Home · Tech Notes · Recertified Eaton / Powerware 5115